ZHU-30A Signer gluing machine-Glue dropping machine-Shenzhen Zhonghu Automation Equipment Co., Ltd.

Contact us

Consulting Hotline：0755-2728-6106

Company name: Shenzhen Lake automation equipment Co., Ltd.
Telephone: 0755-2728-6106
Fax: 0755-27427175
Mobile phone: 136-3286-0790
Mailbox: Address: Building 3, building D, No. 12, Xinqiao industrial district, Xinqiao street, Baoan District, Shenzhen

ZHU-30A Signer gluing machine

Category：Glue dropping machine

Description：

Hotline:0755-2728-6106

Purchasing Consultation

Introduction
Parameter

| Application: Machine nameplate, stickers labels, Q cards and other signs Dijiao

| Principle of operation：

1, the program editor: in-kind editing, and then Chen can be
2, will have been edited program storage, similar products can be transferred out.
3, irrigation head movement, the pump body (stepper motor drive) for the plastic
4, the movement trajectory: straight line. Curve. Point. Box. Round. W type, S type. Can take any irregular trajectory
5, Z axis up and down movement with ball shaft screw rapid response.
6, glue machine automatic ratio

| Parameters:

1	Proportion with glue	3: 1~1:1 adjustable between 1 and any fixed proportion
2	Mixing method	Dynamic mixing
3	Machine travel	680680100MM,, itinerary can be customized according to the actual needs of the customer
4	Counter tops	table1050900,effective working area 680680mm
5	Programming mode	Teaching programming
6	Dimensions	122010501500MM
7	The main pump (A pump)	6cc/turn（Taiwan）
8	Attached pump (B pump)	2.4cc/turn（Taiwan）
9	Glue power	Bujin motor
10	Tank Capacity	A Cylinder 25L with thermostat，B Cylinder 10L
11	A plastic flow	2-8g/s
12	A plastic head	Single
13	Input pressure	0.5-0.7Mpa
14	Machine power	1500W
15	Supply voltage	AC220V±10%,50-60HZ

| Device Configuration:

1	Control System	Xinjie PLC + motion control card +7.2 inch Kunlun on-state touch screen
2	Software system	Zhonghu R&D independently, a domestic counterparts developed a software anti-misuse function, anti-fade automatic shutdown function
3	Bujin motor	YAKO Original motor
4	Metering pump body	Taiwan precision adjustment wear type
5	Cut off the system	Zhonghu R&D independently
6	Mixing device	Zhonghu R&D independently
7	Thermostat	Silicone heaters
8	Frame material	A3*3mm manufacture
9	Sliding device	Taiwan HIWIN Slide rails
10	Mixing tube cleaning	Gas and liquid cleaning

| Features:

1	Friendly and concise interface	Foolproof operation program design, simple operation, practical, ordinary workers can learn all operating methods in 5 minutes
2	耀彩网 High-end imported electronic control system	The main electrical part of the wiring, dust, anti-static, have reached foreign standards Relay Omron. Using the letter Jie PLC All motors are overload protected. Using high-precision motion control system
3	Glue detection feedback function	The drum part is equipped with low level alarm function, timely remind the glue to add
4	Glue filter four protection	Filter protection measures to reduce the mechanical pump body failure probability, to prevent impurities in the glue into the glue pipeline
5	耀彩网 Large work surface	Machine points around two, respectively, put two materials, the machine automatically continuous operation, with more efficient
6	Equipment running more smoothly	耀彩网 The overall frame with ultra-thick solid material, an effective solution to the machine when the high-speed movement of body shake, improve production stability and accuracy
7	耀彩网 High precision mechanical pump body	Precision adjustment wear type
8	耀彩网 Automatic mechanical agitation	耀彩网 AB glue mixing using dynamic, mechanical mixing, to ensure that the real sense of AB glue mixture,Completely put an end to dry glue, dry glue uneven phenomenon.
9	High precision operation	The use of double-layer linear slide and high-precision balance block to ensure the accuracy of operations

| Characteristics of Three-axis Movement:

1, the operation is simple and convenient: touch screen display operation; all Chinese interface, the parameters of the record, display, alarm; for each product to provide the corresponding fixture, the workers training is simple, saving training time and training costs;
2, glue control precision: all key components are imported products, to ensure high speed, precision, while meeting the conditions of automated production under the high reliability requirements.

| Main features of machine：

1, with plastic, plastic irrigation integration, automatic operation, a machine to achieve two functions.
2, the proportion of setting adjustment, plastic volume adjustable. Ready to use at any time, with high precision, on-demand ratio, saving glue.
3, the operation is simple and convenient, the program is simple to edit, easy to disassemble, directly to the A B two kinds of glue were placed in two corresponding barrels, when filling with plastic, workers only need to press the switch can be.
4, according to the performance of the glue, A bucket with a thermostat device, B plastic bucket sealed to prevent volatile, liquid level sensor device, when the glue below this level automatically alarm, add the corresponding glue
5, Easy to clean, automatic cleaning, as long as the set automatic cleaning time is good.